Instructions for spraying a bicycle
Almost everybody has a bike at home. But if you feel your two wheels are a bit too boring, you can easily spice them up a bit. Spray your bike in your favourite colour or apply some extra patterns. This is a very easy way to create a unique bike that will be a real eye-catcher on every ride.
1PREPARING THE BIKE
Disassemble the surfaces that are not going to be sprayed. Only the frame of the bicycle should be sprayed. Sand this lightly with 120-grain sandpaper. Rust must be completely removed.
In addition to changing the colour, you can also decorate your bike with stylish designs. Simply use stickers and spray over them. After drying, the stickers can easily be removed.
2PREPARING THE SPRAYER
Open the paint tin using the end of the included stirrer. Align the suction pipe of the spray adapter forwards. Fill the paint container with paint to the ¾ level and thin according to the manufacturer's specifications. Use the included stirrer. Place the stirrer against the base of the filled paint container. The distance between the notches represents a dilution of 10 %. Afterwards, stir the paint thoroughly.
3SETTING UP THE SPRAYER
Now carry out a test spray. The spray nozzle can be adjusted in three different directions: horizontal paint jet for working from top to bottom, vertical paint jet for working from right to left, detailed spray for precise work. The small wheel on the trigger allows the quantity of paint to be fully adjusted.
4THE SPRAYING PROCESS
The parts to be painted should be suspended or placed in a way that no marks arise during spraying. Start with corners, edges and angles and then spray the surfaces. Maintain a constant distance to the object while spraying. Only change the direction of spray when the sprayer is pointing away from the object. This avoids a build-up of thicker layers of paint during direction changes. Allow the paint to dry according to the manufacturer's instructions.