控制单元用于智能控制 GM 5000 手动静电喷枪。
控制单元用于智能控制 GM 5000 手动静电喷枪。
Control unit to drive the electrostatic manual guns GM 5000EA and GM 5000EAC. Adjustable high-voltage, recipe changes, safety monitoring and many other features.
The WAGNER electrostatic control units are Atex Zone 2 compliant and can therefore be placed much closer to the workplace. In this way, the correct parameters can be set and optimized quickly and directly.
Three recipes for nominal voltage and current can be saved. They can be activated directly from the gun or control unit. This activation of pre-defined settings enables the painter to quickly select his preferred working conditions.
Preventive maintenance of the spray gun is recommended for a continuous optimal spray performance. The spraying time of the connected gun can be monitored and a service interval can be set.
For maximum safety of the coater, the grounding of the gun is monitored by the control unit. If the grounding is interrupted, the high voltage is switched off.
The extremely easy and simple adjustment of all parameters via a single button allows settings to be changed at high speed.
| 尺寸 | 250 x 180 x 120 mm |
|---|---|
| Weight | 2.3 kg |
| 防护等级 | IP 54 |
| 喷枪喷涂电流 | 100 µA |
| 喷枪喷涂电压 | 80 kV |
| 输入频率 | 50-60 Hz |
| 输入电压 | 115-230 V |
| 工作温度 | 5-40 °C |
GA 5000EA控制模块
AquaCoat 5010/5020的控制模块-手动
