2K COMFORT with two fluid circuits

Extended version of mixing and dosing unit for multi-color applications

The WAGNER 2K COMFORT is also available with two fluid circuits that can be operated in parallel. This way, two different materials can be applied simultaneously with only one unit during the cycle of objects that need to be coated. This plays an important role especially for highly reactive materials that need to be physically separated from each other to avoid unit downtimes. With the two-circuit version, each material is provided with its own fluid circuit.

  • Simultaneous working with two fluid circuits leads to time savings
  • Up to 50% shorter cycle time of coated objects in comparison to predecessor model FlexControl Plus
  • Up to 15% lower investment costs compared to two one-circuit units

Back to 2K COMFORT one-circuit version

Power supply115 / 230 VAC
Supply frequency50 / 60 Hz
Mixing accuracy+/- 1%
Mixing ratio0.1 : 1 - 50 : 1
Material pressureMax. 325 bar
Flow rate50 - 7000 cc / min (depending on measuring cell)
Material inputG 1/4" male thread, 60° inner cone
Material output1/4" NPS male thread, 60° inner cone
Components AMax. 10 per fluid circuit
Components BMax. 5 per fluid circuit
Components CMax. 5 per fluid circuit
Flush A Max. 5 per fluid circuit
Flush BMax. 2 per fluid circuit
Flush CMax. 2 per fluid circuit
Guns2 per fluid circuit
Material temperature+5 °C - +60 °C; +41 °F - +140 °F
Ambient temperature+5 °C - +60 °C; +41 °F - +140 °F
Material viscosity 20 - 2200 mPas, depending on measuring cell
Remote controlOne for each fluid circuit
pH value materialpH 3.5 - 9
WAGNER Pressemeldung 2K COMFORT with two fluid circuits EN

WAGNER Pressemeldung 2K COMFORT with two fluid circuits EN

Mehr über FF 20-30

Brochure 2K COMFORT AME

Brochure 2K COMFORT AME

Mehr über FF 20-30

Flyer 2K COMFORT with two fluid circuits AME

Flyer 2K COMFORT with two fluid circuits AME

Mehr über FF 20-30