Instructions for spraying garage doors

In this guide we will show you how to spray a garage door yourself.

  • Wagner paint spray system for wood and metal paints, e.g. W 590 Flexio
  • Random orbital or sheet sander
  • Brush
  • Dust Mask
  • Micro-fibre cloth
  • 120 grade sandpaper
  • Masking material
  • Paint and primer

Step-by-step guide for painting garage doors

Step 1 of 6: Sand the garage door

Sand the garage door

You first need to sand down the old paint. Using an random orbital or sheet sander is the quickest way to do this. You can then remove any paint from grooves by hand using 120 grade sandpaper.

Sand the garage door

You first need to sand down the old paint. Using an random orbital or sheet sander is the quickest way to do this. You can then remove any paint from grooves by hand using 120 grade sandpaper.

Step 2 of 6: Cleaning the surface

Cleaning the surface

For the perfect paint application, the surface must be dry and free from grease or dust. Coarse dust can be removed with a brush and fine dust can be removed with a micro-fibre cloth.

Step 3 of 6: Masking

Masking

Carefully mask off all of the surfaces that you are not going to spray. The easiest way to do this is to use masking tape combined with paper or a polythene dust sheet. For handles and other small parts, regular masking tape is ideal.

Masking

Carefully mask off all of the surfaces that you are not going to spray. The easiest way to do this is to use masking tape combined with paper or a polythene dust sheet. For handles and other small parts, regular masking tape is ideal.

Step 4 of 6: Preparing the sprayer

Preparing the sprayer

The sprayer is ready for use in just a few steps. Pour paint into the paint container until it is 3/4 full and dilute the material in accordance with the manufacturer’s instructions, or depending on the spray pattern you are aiming for. To do this, use the included stirrer, each notch corresponding to a 10% dilution.The suction pipe can be aligned depending on how you are going to work.When spraying downwards, turn the suction tube forwards. When spraying objects overhead, turn the suction tube back. The spray jet can also be adjusted three ways - horizontally, vertically and detailed. Carry out a test spray to find the right settings for you.

Preparing the sprayer

The sprayer is ready for use in just a few steps. Pour paint into the paint container until it is 3/4 full and dilute the material in accordance with the manufacturer’s instructions, or depending on the spray pattern you are aiming for. To do this, use the included stirrer, each notch corresponding to a 10% dilution.The suction pipe can be aligned depending on how you are going to work.When spraying downwards, turn the suction tube forwards. When spraying objects overhead, turn the suction tube back. The spray jet can also be adjusted three ways - horizontally, vertically and detailed. Carry out a test spray to find the right settings for you.

Step 5 of 6: The spraying process

The spraying process

Start with the outer edges of the garage door and always change the direction of spray when the jet is past the edge of the garage doors. This avoids thicker layers of paint being applied when you change direction. Maintain a constant distance from the doors.

Tip: Since paint applied too thickly can cause drips, it is better to spray two thin coats than one thick coat. After spraying, allow the paint to dry in accordance with the manufacturer’s instructions.

The spraying process

Start with the outer edges of the garage door and always change the direction of spray when the jet is past the edge of the garage doors. This avoids thicker layers of paint being applied when you change direction. Maintain a constant distance from the doors.

Tip: Since paint applied too thickly can cause drips, it is better to spray two thin coats than one thick coat. After spraying, allow the paint to dry in accordance with the manufacturer’s instructions.

Step 6 of 6: Cleaning

Cleaning

Clean the spray attachment thoroughly with water or solvent after use.

Mehr Projekte

WAGNER Group W 590 Produktbild

W 590 FLEXiO

The flexible spray system for outdoor and indoor use

W 590 FLEXiO
Produktfinder

WAGNER product finder

Here you can find more products

Go to products
Spraying varnishes: Instructions & tips

Spraying varnishes: Instructions & tips

Learn here how best to proceed when spraying varnish, what you should look out for, why it's worth spraying varnishes and what the best equipment is for it.

Spraying varnishes