The WACON Sprint 2 Expert control unit can be used to control manual and automatic guns and is operated via an intuitive touch display.
⚠️ Hai attivato la protezione avanzata dal tracciamento nel tuo browser. Per questo motivo il modulo non può essere visualizzato. Disattiva la protezione dal tracciamento nelle impostazioni del browser e ricarica la pagina.
The WACON Sprint 2 Expert is used for manual control of manual and automatic guns and operation via a touch display. An additional power supply can be used to connect a vibration motor, which is started by the gun trigger. High-precision air volume and high-voltage regulators enable reproducible coating results.
Further information on the products in our Sprint 2 family can be found here.
A modern, clear user interface enables intuitive and fast menu navigation.
The high-resolution display and fast processor allow precise, delay-free operation, even when wearing gloves. These must be ESD-capable for ATEX reasons. The sophisticated operating concept allows parameters to be set using sliders or alternative button input.
The intelligent coating assistant provides a recipe suggestion for any coating task, no matter how tricky, based on just a few inputs. Even inexperienced users can obtain a suitable coating recipe in approx. 30 seconds. The wizard also provides recommendations for the gun distance, suitable nozzles and accessories.
A service menu with integrated operating hours and maintenance counter ensures that your system stays always in optimum maintenance condition. The system warns you which spare and wear parts should be checked before the recommended maintenance interval expires. If you use other empirical values or work with abrasive powders, the intervals can be adjusted individually. This enables you to achieve consistently excellent coating quality.
| Application technique | Corona, Tribo, Manual coating, Automatic coating |
|---|---|
| Number of guns | 1-1 |
| Dimensions | 236 x 270 x 137 mm |
| Weight | 4,350 g |
| Protection class | IP 54 |
⚠️ Hai attivato la protezione avanzata dal tracciamento nel tuo browser. Per questo motivo il modulo non può essere visualizzato. Disattiva la protezione dal tracciamento nelle impostazioni del browser e ricarica la pagina.
